SmokePumpe
Smoke-EL
This
extraordinary small SmokePump delivers.
Weighing only 90g, it still has a flow rate of
600ml/min. The diameter of the SmokePump is only 27mm, its length 50mm. You can
easily attach the SmokePump to your model using only two screws. The input
signal will come from the SmokeDriver, so there is no need for additional
programming.
Moreover, to
enable usage of this extraordinary small and lightweight SmokePump with other
smoke devices, we developed the PumpDriver. The PumpDriver is controlled
through one channel and its pumping capacity, ranging from 0% - 100%, is
remotely adjustable. A safety device will prevent any unwanted triggering of
the pump. We offer two versions of the pump: one version connects to a PowerBox
without extra batteries, the other can connect to a separate 2S-LiPo-battery
Used Materials:
The pump
housing and lid are made of Al Zn Mg Cu. 1,5, usage for aircraft construction for
high stress parts, hardness Brinell 140. Cog wheels made of Ms 58 / CuZn 40 Pb
2, mounted swimming in the box, not pressed, hardness Brinell 95. Seals Viton
von Du Pont, up to +200°C, resistant against all hydrocarbons.
Technical Data:
Weight.............................:
90g
Dimension.......................:
27mm
Length..............................:
50mm
Flow rate..........................: 600
ml/min
Voltage.............................:
6 Volt
Current Consumption......: 3
A
Pipe Connector................: 4mm
Feso
Plug Connector.................:
MPX
Spareparts
This is an extraordinary small and lightweight SmokePump for use in any smoke device. Its flow rate is up to 600ml/min at 6V and 3A.
159,00€
Add
Spareparts
This especially small PumpDriver packs a punch.
Weighing only 19g it supplies the SmokePump directly from a 2S-LiPo battery or the PowerBox. To connect the PumpDriver with the receiver, you simply need one free channel.
Please choose your battery connection.
Weighing only 19g it supplies the SmokePump directly from a 2S-LiPo battery or the PowerBox. To connect the PumpDriver with the receiver, you simply need one free channel.
Please choose your battery connection.
35,00€
Add
Startersets
The Set includes the SmokePump with PumpDriver and 1 liter RedOil (air).
You only have to add the Tank and the house connector to the exhauster.
You only have to add the Tank and the house connector to the exhauster.
195,00€
Add